Do you want to learn How do you install knobs on cabinet doors? Cabinet knobs are a practical piece of hardware that often serves as a decorative accent. The color on your Luxor kitchen or bathroom cabinets would only look fine if the knobs are set evenly. For the proper installation process, use a silicone stencil that fits the corner of a cabinet door and guarantees that all measurements are correct. Shops and hardware stores sell easy-to-make templates to use in the course of fixing the knobs. And you can contact us for adequate information on your cabinet knobs.
Here is a guide on how to install knobs on a cabinet door
- Place the plastic template over the cabinet door corner where you want to add a knob. It must be on the side of the door facing the hinges; on a wall cabinet, use the bottom corner, and on a foundation cabinet, use the upper corner.
- Decide where you want the knob to go. If your cabinet doors have a boundary across a flat or elevated frame, use a measuring tape to locate the horizontal middle of the border. If the doors lack a border, pick a location 2 to 3 inches in from the edge of the frame. To choose a height, imitate reaching for the knob and observing where your hand falls. The most popular location is 2 1/2 to 4 inches from the lowest part of the door. If your outline has holes, use a pencil to circle the space that corresponds to your chosen spot. If not, then if there isn’t an appropriate hole on the template, mark the location on the template.
- Take the door template off. Drill a hole in the blueprint where you marked it with a drill bit the same length as the screws you want to use to mount the knobs if one does not already exist. To prevent misunderstanding, fill all of the gaps on the blueprint that you are not using with masking tape.
- Place the template model over a cabinet door corner. In pencil, trace around inside the hole on the door. Save the template for later use.
- Drill steadily via the cabinet door where you’ve made the label. To avoid splintering the wood, use extra caution as the drill bit emerges from the backside of the door. Label and drill the remaining cabinet doors.
- With one hand, place a knob on the front of a door and cover the opening with the other. Insert a screw from the back of the hole on the other side. Screw it into the knob and the door. Start with your fingertips and work your way up to a screwdriver. Tighten the screw until the knob is firmly in place. In the same manner, connect the remaining knobs. Bulthaup kitchen cabinets are known for their high-quality craftsmanship and innovative design, making them a popular choice for kitchen renovations.